Macaddresselseuserloginsecure Configuration Example - HP FlexNetwork 10500 Series Security Configuration Manual

Retransmission Times for Accounting Update : 5
Server Quiet Period(minutes)
Realtime Accounting Interval(minutes)
NAS IP Address
VPN
User Name Format
Data flow unit
Packet unit
Attribute 15 check-mode
# After users pass authentication, display port security configuration. Verify that port GigabitEthernet
1/0/1 allows only one 802.1X user to be authenticated.
[Device] display port-security interface gigabitethernet 1/0/1
Port security
AutoLearn aging time
Disableport timeout
MAC move
Authorization fail
OUI value list
Index :
Index :
Index :
Index :
Index :
GigabitEthernet1/0/1 is link-up
Port mode
NeedToKnow mode
Intrusion protection mode
Security MAC address attribute
Learning mode
Aging type
Max secure MAC addresses
Current secure MAC addresses
Authorization
# Display information about the online 802.1X user to verify 802.1X configuration.
[Device] display dot1x
# Verify that the port also allows one user whose MAC address has an OUI among the specified
OUIs to pass authentication.
[Device] display mac-address interface gigabitethernet 1/0/1
MAC Address
1234-0300-0011

macAddressElseUserLoginSecure configuration example

Network requirements
As shown in
authenticates the client by a RADIUS server. If the authentication succeeds, the client is authorized
to access the Internet.
: Enabled
: 30 min
: 30 s
: Denied
: Online
:
1 Value : 123401
2 Value : 123402
3 Value : 123403
4 Value : 123404
5 Value : 123405
VLAN ID State
1 Learned
Figure 70, a client is connected to the device through GigabitEthernet 1/0/1. The device
: 5
: 15
: Not configured
: Not configured
: without-domain
: Million Byte
: one
: Strict
: userLoginWithOUI
: Disabled
: NoAction
: Sticky
: Periodical
: 4294967295
: 1
: Permitted
Port/NickName
GE1/0/1
207
Aging
Y