Logging Out Online Portal Users; Displaying And Maintaining Portal - HP FlexNetwork 10500 Series Security Configuration Manual

•
First log out from the current port.
•
Then re-authenticate on the new Layer 2 port.
To enable portal roaming:
Step
1. Enter system view.
2. Enable portal
roaming.

Logging out online portal users

Logging out a user terminates the authentication process for the user or removes the user from the
authenticated users list.
When the number of users exceeds 2000, executing the portal delete-user command takes a few
minutes. To ensure successful logout of portal users, do not perform the following operations during
the command execution:
•
Master/backup device switchover.
•
Disabling portal authentication on the interface.
To log out online users:
Step
1. Enter system view.
2. Log out IPv4 online portal users.
3. Log out IPv6 online portal users.

Displaying and maintaining portal

Execute display commands in any view and the reset command in user view.
Task
Display portal rules on an interface (in standalone
mode).
Display portal rules on an interface (in IRF mode).
Display portal configuration and portal running state
information on an interface.
Display portal authentication server information.
Display portal Web server information.
Command
system-view
portal roaming enable
Command
system-view
portal delete-user { ipv4-address | all | interface interface-type
interface-number }
portal delete-user { all | interface interface-type interface-number
| ipv6 ipv6-address }
156
Remarks
N/A
By default, portal roaming is
disabled.
You cannot enable portal roaming
when login users exist on the
device.
Command
display portal rule { all | dynamic | static }
interface interface-type interface-number [ slot
slot-id ]
display portal rule { all | dynamic | static }
interface interface-type interface-number [ chassis
chassis-number slot slot-number ]
display portal interface interface-type
interface-number
display portal server [ server-name ]
display portal web-server [ server-name ]