Failed To Set The Storage Path - HP FlexNetwork 10500 Series Security Configuration Manual
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Configuration manual (512 pages) ,
- Specifications (42 pages) ,
- Datasheet (20 pages)
Table of Contents
Advertisement
Solution
1.
Obtain or request local certificates first.
2.
Use the mkdir command to create the required path.
3.
Specify a correct export path.
4.
Configure the correct key pair in the PKI domain.
5.
Clear up the storage space of the device.
6.
If the problem persists, contact Hewlett Packard Enterprise Support.
Failed to set the storage path
Symptom
The storage path for certificates or CRLs cannot be set.
Analysis
•
The specified storage path does not exist.
•
The specified storage path is illegal.
•
The storage space of the device is full.
Solution
1.
Use the mkdir command to create the path.
2.
Specify a valid storage path for certificates or CRLs.
3.
Clear up the storage space of the device.
4.
If the problem persists, contact Hewlett Packard Enterprise Support.
276
Advertisement
Table of Contents
Troubleshooting
