HP FlexNetwork 10500 Series Security Configuration Manual page 48

Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure up to 16 HWTACACS schemes. An HWTACACS scheme can be referenced by multiple
ISP domains.
To create an HWTACACS scheme:
Step
1. Enter system view.
2. Create an HWTACACS
scheme and enter
HWTACACS scheme view.
Specifying the HWTACACS authentication servers
You can specify one primary authentication server and up to 16 secondary authentication servers for
an HWTACACS scheme. When the primary server is not available, the device searches for the
secondary servers in the order they are configured. The first secondary server in active state is used
for communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can act as the
primary authentication server in one scheme and as the secondary authentication server in another
scheme at the same time.
To specify HWTACACS authentication servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authentication servers.
Specifying the HWTACACS authorization servers
You can specify one primary authorization server and up to 16 secondary authorization servers for
an HWTACACS scheme. When the primary server is not available, the device searches for the
secondary servers in the order they are configured. The first secondary server in active state is used
for communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can act as the
primary authorization server of one scheme and as the secondary authorization server of another
scheme at the same time.
To specify HWTACACS authorization servers for an HWTACACS scheme:
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authentication server:
primary authentication
{ host-name | ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection | vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
authentication server:
secondary authentication
{ host-name | ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection | vpn-instance
vpn-instance-name ] *
34
Remarks
N/A
By default, no HWTACACS
scheme is defined.
Remarks
N/A
N/A
By default, no authentication
server is specified.
Two HWTACACS authentication
servers in a scheme, primary or
secondary, cannot have the
same combination of hostname,
IP address, port number, and
VPN.