G(P).Riwt - Mitsubishi Electric MELSEC-Q Series User Manual

9.3

G(P).RIWT

The G(P).RIWT instruction writes the specified points of data to the buffer memory areas of the target station or the
device in the CPU module of the target station.
[Instruction [Execution
symbol] condition]
G.RIWT
GP.RIWT
Setting Internal device
data (System, user)
Bit Word

(S1)

(S2)
(D)
(1) Setting data
*1
Device
Start I/O number of the module (First two digits of I/O number written
Un
with three digits)
(S1) Start number of the device in which control data is stored
(S2) Start number of the device to which data to be written is stored
Device that turns on for one scan upon completion of writing.
(D)
(D) + 1 also turns on at an abnormal end.
*1 The local device and the file register of each program cannot be used as a device for setting data.
Command
Command
Applicable device
Link direct
device
File
J\
register
Bit Word
Description
CHAPTER 9 DEDICATED INSTRUCTIONS
G.RIWT Un (S1)
GP.RIWT Un (S1)
Intelligent
function module Index
device register Z
U\G



Setting range
0 to FE
Within the range of the
specified device
Within the range of the
specified device
Within the range of the
specified device
(S2) (D)
(S2) (D)
Constant
Others
K, H $
  
  
  
Data type
16-bit binary
H
Device name
Bit
181
9