1
Selected station
information
Check if the
parameter status matches
with the status of the
connected
modules.
Status
*1
To check error details, a programming tool is required.
272
1) Reservation setting mismatch
2) Error invalid setting mismatch
3) Station type mismatch
4) Number of occupied stations
mismatch
5) Expanded cyclic setting
mismatch
No error
Temporary error invalid
Link error
Watchdog timer error
Fuse blown error
No error
Transient error
No error
4
When a CC-Link system is
newly configured or the existing
CC-Link system is changed
A2-4
A2-4
3
A2-9, A4-5
A2-9, A4-5
Error
5
The numbers above correspond to those listed in the
"Check item" column in Section 11.2.1 "Problems due to
disconnection of a slave station".
Take corrective action with reference to the corresponding item.
When the CC-Link system
has operated
B2-4
B2-4
(To the next page)