Mitsubishi Electric MELSEC-Q Series User Manual page 218

Parameter registration (data link startup)
Process at completion of the G(P).RLPASET instruction
Parameter setting change
Parameter
change instruction
G(P).RLPASET instruction
Control data
Slave station setting data
*1 Set the station number in hexadecimal. (Example) Set 14
216
Perform abnormal completion process.
for station No. 20.
H
Dedicated instruction
(G(P).RLPASET)
Turn the parameter setting
instruction off.
Instruct to refresh at normal
completion of the G(P).RLPASET
instruction.
Instruct to start the control
program at normal completion
of the G(P).RLPASET instruction.
Instruct to stop data link
Turn the data link stop
instruction off
Instruct to stop refreshing
Instruct to change parameters
Clear completion status.
Slave station setting data/
communication and automatic
update buffer assignment data:
Valid
Total module connected: 3
Retry count: 3 times
Automatic reconnection station
count: 1
Operation specification when
CPU is down: Stop
Scan mode setting:
Asynchronous
Delay time setting: 0
First: Local station, occupies
1 station, station
*1
number 1
Second: Remote I/O station,
occupies 1 station,
station number 2
Third: Remote I/O station,
occupies 1 station,
station number 3
(To the next page)