Mitsubishi Electric MELSEC-Q Series User Manual page 401

(2) Availability of added functions of a CPU module, master/local module, and
programming tool depending on the version
Added function
Remote net Ver.2 mode
Remote net additional mode
Refreshing/compulsorily clearing a slave station when
the switch on a programmable controller CPU is set to
STOP
Remote I/O station points setting
Number of connectable modules: 5 to 8
Redundant CPU
Mounting a module on the extension base unit of a
Redundant CPU
Standby master station (data link start function using a
standby master station)
Block data assurance per station
Specification of remote device station to be initialized
Retry count setting when dedicated instructions are
used
Master station duplication error canceling function
Transmission speed test (programming tool used)
Transmission speed test (link special relays (SBs)
and link special registers (SWs) used)
Message transmission function (G(P).RDMSG
instruction)
Status logging
Status logging flash ROM storage
Module error history display
Station information setting on the CC-Link
configuration window
Automatic detection of connected devices
Data backup/restoration
First 5 digits of the serial No.
of a master/local module
-
*1
-
-
-
*2
-
06052 or later
06052 or later
07112 or later
*3
08032 or later
08032 or later
08102 or later
09112 or later
10032 or later
10032 or later
10032 or later
10112 or later
12032 or later
*6
11042 or later
-
iQ Sensor Solution Reference Manual
iQ Sensor Solution Reference Manual
×: Not supported, -: Not subject to the version
Applicable programming tool version
GX Works2 GX Developer
8.03D or later
1.15R or later 8.03D or later
8.03D or later
8.32J or later
1.87R or later 8.18U or later
1.87R or later 8.45X or later
-
1.15R or later 8.32J or later
-
1.15R or later
-
-
1.15R or later
1.15R or later
1.15R or later
1.73B or later
APPENDICES
*4
A
*5
-
-
×
-
-
×
×
×
×
×
×
399