Table of Contents
Advertisement
P
ROGRAMMABLE
2, 3
CALM
The lamp associated with this key lights when a malfunction is
detected in the system, the answer detection link, the
(Combined
PMS/PMSHOBIC link, or the VMS link. The CALM lamp stays
alarm)
lit until the problem is corrected.
The CALM lamp indicates the status of the alarms:
When you press the <CALM> key, the alarm(s) that have
occurred are shown in the LCD:
• The PMS alarm applies to WelCOMM systems only.
• Some or all of the combined alarms can be programmed as a
5
2, 3,
CAMP
Registers a campon for stations that do not have call waiting
terminating activated in their BCLs.
(Campon)
2, 3
CODE
Distinguishes code calls from other calls. When a code call comes
to your console, it rings at the <CODE> key and the <ANS> key.
(Code)
To answer, press either key.
5-4
F
EATURES FOR
Table 5-3 SelecSet 940A Features(continued)
This status...
Dark
Lit steadily
Slow wink/flash
Fast wink/flash
This status...
MJ/MN
ANSDET
PMS
VMS
single alarm at one key.
S
S
K
ELEC
ET
EYS
no alarm conditions exist
one alarm has occurred
two or three alarms have occurred
all four alarms have occurred
major/minor system alarm
answer detection link alarm
PMS/PMSHOBIC link alarm
VMS link alarm
HCXTD860, Rev. A01, September 2001
S
S
940A U
ELEC
ET
Indicates that...
Indicates this...
G
SER
UIDE
Advertisement
Table of Contents
