S
S
940A U
ELEC
ET
Fixed Keys
About fixed
keys
CAPs
CAP
1
Used to make/receive only one call.
2
To answer or make a second call, press <HOLD> , then press CAP 2 to
answer or dial the second call.
3
Repeat the procedures for CAP 2 to handle a third call.
4
Reserved for holding calls and receiving special calls, e.g. priority calls.
Note: If you press a CAP before putting a call on hold, the call is disconnected.
HCXTD860, Rev. A01, September 2001
G
SER
UIDE
Fixed keys provide fixed access to frequently-used
functions that facilitate call control operations. These
include:
• Call appearance keys (CAPs)
• Other fixed keys
CAPs are virtual lines that are used to receive, place and
hold calls while call control operations such as hold, join,
and conference are performed. When call handling
operations are performed (answering, placing a call, etc.),
the lowest-numbered CAP is automatically selected.
Function/Operation
F
K
IXED
EYS
1-7