Table 1-1 Fixed Key Operations - Hitachi SelecSet 900 User Manual

F K
IXED EYS
Other fixed
keys
Key
<START>
<ANS>
<SWAP>
<JOIN>
<HOLD>
<CONF>
<CNCL>
1-8
Table 1-1

Table 1-1 Fixed key operations

Use to originate calls or perform other call processing features
(similar to picking up the receiver on other phones).
Use to answer all calls that ring at the attendant.
Use to alternate between two sides of a split call.
Use to transfer a call, and return the attendant to the idle state.
Use to place an active call on hold.
• Use to establish a conference call. Press <JOIN>, dial a station
or outside number, then press <CONF> to establish a
three-party conference.
• Press <CONF>, dial a number, and press <CONF> again to
establish a multiparty conference of up to six parties.
Press <CNCL> during call extension (transfer) if you misdial a
number. Also disconnects the last party added to a conference.
describes other fixed keys and their operation.
Function
HCXTD860, Rev. A01, September 2001
S S 940A U
ELEC ET
G
SER UIDE