Siemens SINAMICS G130 Engineering Manual page 496

Description of Options
Engineering Information
The TM150 Terminal Module does not provide electrical isolation between its inputs for temperature sensors and the
electronic evaluation circuit. As a result, temperature sensors may be connected only if they are at ground potential
or comply with the safety isolation requirements defined by EN 61800-5-1.
Design
The TM150 Terminal Module features the following components:
·
6/12 temperature sensor inputs (depending on connection type) for KTY84-130, PT1000, PT100, PTC or
bimetallic NC contact (evaluation can be parameterized for a circuit with 1x2 wires, 2x2 wires, 3 wires or 4
wires for each terminal block)
·
2 DRIVE-CLiQ sockets
·
1 connection for the electronics power supply via the 24 V DC supply connector
·
1 PE/protective conductor connection
The TM150 Terminal Module is designed to be snapped onto a standard DIN rail TH 35 compliant with EN 60715
(IEC 60715).
The signal cable shield can be connected at the TM150 Terminal Module by means of a terminal clamp, e.g. of type
SK8 supplied by Phoenix Contact or type KLBÜ CO 1 supplied by Weidmüller.
The status of the TM150 Terminal Module is indicated by a multi-color LED.
Technical data
TM150 Terminal Module
6SL3055-0AA00-3LA0
Power demand, typ. / max.
at 24 V DC
• Connection cross-section, max.
• Fuse protection, max.
Temperature sensor inputs
The following temperature sensors can be evaluated at the inputs:
KTY84-130, PT1000, PT100, PTC or bimetallic NC contact.
The inputs of each terminal block can be parameterized to evaluate
1x2 wires, 2x2 wires, 3 wires or 4 wires.
• Permissible temperature range
• Connection cross-section, max.
• Current per sensor, approx.
• Safe isolation according to EN 61800-5-1
Power loss
PE connection
Dimensions
• Width
• Height
• Depth
Weight approx.
Conformity
SINAMICS Engineering Manual – November 2015
496/528
Ó Siemens AG
Approx. 0.1 A / 0.5 A
2
2.5 mm
20 A
-99°C to +250°C
2
1.5 mm
0.8 mA
No
< 10 W
M4 screw
30 mm
150 mm (+ shield connecting plate 28 mm)
119 mm
0.41 kg
CE