Examples; Coupled Motion - Siemens SINUMERIK 840D sl Function Manual

5.8

Examples

5.8.1

Coupled motion

Application Example: Two-sided machining
Example 1
Example of an NC part program for the axis constellation shown in Fig.:
TRAILON(V,Y,1)
TRAILON(W,Z,-1)
G0 Z10
G0 Y20
G1 Y22 V25
TRAILOF(V,Y)
TRAILOF(W,Z)
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
; Activation of 1st coupled axis group
; Activation of 2nd coupled axis group
; Infeed Z and W axes in opposite axial directions
; Infeed of Y and V axes in same axis ?direction
; Superimpose dependent and independent movement of coupled
motion axis "V"
; Deactivate 1st coupled axis group
; Deactivate 2nd coupled axis group
M3: Coupled axes
5.8 Examples
341