Reposition - Siemens SINUMERIK 840D sl Function Manual

• Synchronized actions
• M functions
References
The complete description of the Block search is available in:
/FB1/ Basic Functions Function Manual; Mode Group, Channel, Program Mode (K1),
Program test
15.6.3

Reposition

Function
Following the end of the last action block (last traversing block before repositioning), NC
S ? tart outputs the approach block for repositioning all channel axes programmed in the part
program as far as the target block.
Geometry axes
In the approach block, the geometry axes of the RESU working plane (e.g. 1st and 2nd
geometry axes of the channel) traverse the shortest route along the contour to the program
continuation point.
Figure 15-7
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Retraceable contour ranges and REPOS
TE7: Continue machining - retrace support
15.6 Retrace support
635