Preprocessing In The Dynamic Nc Memory - Siemens SINUMERIK 840D sl Function Manual

Subroutine UP2 is not pretranslated, but the call description is generated.
b) Bit 5 = 0
MD10700 $MN_PREPROCESSING_LEVEL=13 ; bit 0, 2, 3,
Both subroutines are pretranslated, and the call description is generated.
c) Example of an invalid subroutine with activated compiling:
PROC SUB1 PREPRO
G291
G0 X0 Y0 Z0
M17
18.5.2

Preprocessing in the dynamic NC memory

Machine data for preprocessing only in the dynamic NC memory with selective selection:
N30 $MN_MM_DRAM_FILE_MEM_SIZE = 800
N40 $MN_PREPROCESSING_LEVEL = 63
M17
Machine data for preprocessing in the dynamic NC memory with the option of using the static
NC memory and selective selection:
N30 $MN_MM_DRAM_FILE_MEM_SIZE = 800
N40 $MN_PREPROCESSING_LEVEL = 127
M17
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
; ← Alarm when compiling, G291 not possible
; Bit 5 = 1 Selective program
selection
; Bit 6 =0 No switching to static NC
memory if dynamic NC memory is full
; Reserve space
; Bit 0-5 = 1
; Bit 5 = 1 Selective program
selection
; Bit 6 = 1 Switching to static NC
memory if dynamic NC memory is full
; Reserve space
; Bit 0-6 = 1
V2: Preprocessing
18.5 Examples
693