Handling Transformation Package (Te4); Signals From Channel (Db21 - Siemens SINUMERIK 840D sl Function Manual

21.9

Handling Transformation Package (TE4)

21.9.1

Signals from channel (DB21, ...)

DB21, ...
DBX29.4
Edge evaluation: Yes
Signal state 1 or Activate PTP traversal.
edge change 0 → 1
Signal state 0 or Activate CP traversal.
edge change 1 → 0
Signal irrelevant for No handling transformations active.
...
Additional /FB3/ Function Manual, Special Functions; 3-Axis to 5-Axis Transformation (F2)
references
DB21, ...
DBX33.6 Transformation active
Edge evaluation: Yes
Signal state 1 or Active transformation.
edge change 0 → 1
Signal state 0 or Transformation not (no longer) active.
edge change 1 → 0
Signal irrelevant for No transformation used.
...
Additional references /FB3/ Function Manual, Special Functions; 3-Axis to 5-Axis Transformation (F2)
DB21, ...
DBB232 Number of active G function of G function group 25 (tool orientation reference)
Edge evaluation:
Meaning 1 ORIWKS: The tool orientation is implemented in a workpiece coordinate system and is thus not
dependent on the machine kinematics.
Meaning 2 ORIMKS: The tool orientation is defined in the machine coordinate system and is thus dependent on
the machine kinematics. This is the default setting.
Meaning 3 ORIPATH: The tool orientation is implemented with the programmed lead and side angles relative to
the path tangent and surface normal vector.
DB21, ...
DBX317.6 PTP traversal active
Edge evaluation: Yes
Signal state 1 or PTP traversal active.
edge change 0 → 1
Signal state 0 or CP traversal active.
edge change 1 → 0
Signal irrelevant for No handling transformations active.
...
Additional references /FB3/ Function Manual, Special Functions; 3-Axis to 5-Axis Transformation (F2)
Special Functions
Function Manual, 09/2011, 6FC5397-2BP40-2BA0
Activate PTP traversal
Signal(s) updated:
Signal(s) updated:
Signal(s) updated:
Signal(s) updated:
Z3: NC/PLC interface signals
21.9 Handling Transformation Package (TE4)
747