Dell EMC ML3 User Manual page 121

Flag
Number Flag Name
25 Interface
26 Cooling Fan
Failure
27 Power Supply
30 Hardware A
31 Hardware B
32 Interface
33 Eject media
34 Download fail
36 Drive temperature 24h
37 Drive voltage
38 Predictive failure
Hex
Code Description
19h Set when the tape drive detects a
problem with the SCSI, Fibre
Channel, or RS-422 interface.
1Ah A tape drive cooling fan failed.
1Bh A redundant power supply failed
inside the tape drive enclosure.
Check the enclosure users
manual for instructions on
replacing the failed power
supply.
1Eh Set when a hardware failure
occurs that requires that you reset
the tape drive to recover.
1Fh Set when the tape drive fails its
internal Power-On Self-Tests.
20h Set when the tape drive detects a
problem with the SCSI, Fibre
Channel, or RS-422 interface.
21h Set when a failure occurs that
requires you to unload the
cartridge from the drive.
22h Set when the tape drive detects a
problem with the SCSI, Fibre
Channel, or RS-422 interface.
Set when the drive's temperature
sensor indicates that the drive's
temperature is exceeding the
recommended temperature of the
library.
25h Set when the drive detects that
the externally supplied voltages
are either approaching the
specified voltage limits or are
outside the voltage limits.
26h A hardware failure of the tape
drive is predicted. Call the tape
drive supplier helpline.
Action Required
Locate Error Code 8 or 9 in
"Drive Error Codes:
Single-character display (SCD)"
on page 100.
Fan failure inside tape drive
mechanism or tape drive
enclosure.
A redundant power supply failed
inside the tape drive enclosure.
Check the enclosure users
manual for instructions on
replacing the failed power
supply.
A redundant power supply failed
inside the tape drive enclosure.
Check the enclosure users
manual for instructions on
replacing the failed power
supply.
Note the error code on the
single-character display and see
in "Drive Error Codes:
Single-character display (SCD)"
on page 100 for the appropriate
instructions.
Set when the tape drive detects a
problem with the SCSI, Fibre
Channel, or RS-422 interface.
Unload the tape cartridge, then
reinsert it and restart the
operation.
Ensure that it is the correct FMR
image. Download the FMR image
again.
See Error Code 1 in "Drive Error
Codes: Single-character display
(SCD)" on page 100.
See Error Code 2 in "Drive Error
Codes: Single-character display
(SCD)" on page 100.
Predictive failure of drive
hardware
Troubleshooting
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
Warning
Event
99