Dell EMC ML3 User Manual page 86

Table 31. Locating Management functions (continued)
Task
Cleaning, tape drive
Configuration, save and restore
Configuration, reset
Configuration file, restore
Configuration file, save
Date and time, configure
Diagnostics, run Demo Mode
Diagnostics, run Library Verify
Diagnostics, run Drive test
Diagnostics, run Slot to Slot
exerciser
Drive firmware, update
Drives and Modules, reset the list
Drive status
Drive logs, export
Drive, modify port settings
Email Notification
Encryption, configure
Encryption Connectivity Check
Factory/Manufacturing reset
Identifier light, turn On or Off
Initial Setup
Inventory List
I/O Station, enable or disable
I/O Station, open
Kerberos Authentication, configure Not available with this interface
LCD Adjustment
64
Dell EMC ML3 Tape Library: User's Guide
Operator Panel
Not available with this interface
Not available with this interface
Not available with this interface
Not available with this interface
Not available with this interface
Configuration > Date & Time
Maintenance > Library Tests
Not available with this interface
Maintenance > Library Tests
Not available with this interface
Maintenance > Drive Firmware
Upgrade (requires FAT32 format USB
drive)
Not available with this interface
Status > Drive
Maintenance > Drive Logs
Download (requires FAT32 format
USB drive)
Not available with this interface
Not available with this interface
Not available with this interface
Not available with this interface
Configuration > Reset > Full Factory
Reset
Not available with this interface
Configuration > Initial System
Setup
Not available with this interface
Not available with this interface
See "Accessing cartridges" on page
70.
Maintenance > LCD Adjustment
Menu Navigation
Management GUI
Drives > Actions > Clean Drive See
"Methods of cleaning drives" on page
69.
Settings > Library > Advanced
Settings > Library > Advanced
Settings > Library > Advanced
Settings > Library > Advanced
Settings > Library > Date and Time
Library > Actions > Tests
Library > Actions > Tests
Library > Actions > Tests
Library > Actions > Tests
Drive > Actions > Update Drive
Firmware
Settings > Library > Advanced
Drives
Drives > Actions
Drives > Actions
Settings > Notifications
Settings > Security > Encryption For
LME, see "Configuring Library
Managed Encryption (KMIP)" on page
70.
Settings > Security > Encryption
Settings > Library > Advanced
Library > Actions > Turn Identifier
Light On or Off
Settings > Library > Initial
Configuration Wizard
Cartridges
Library > Modules and Magazines >
Actions > Enable or Disable I/O
Station
Library > Modules and Magazines >
Actions > Unlock I/O Station
Settings > Security > Kerberos
Authentication
Not available with this interface