Locating Management Functions; Front Panel Leds - Dell EMC ML3 User Manual

Figure 57. Front panel LEDs
Table 30. Front panel LEDs
LEDs
Ready
Unit ID
Clean
Attention
Error

Locating Management functions

Table 31. Locating Management functions
Task
Advanced settings
Auto Calibration
Auto Clean
Cartridge, eject from a drive
Cartridge Inventory, rescan
Cartridges, list
Cartridges, move
Cartridges, graphical view
Certificates, create, backup, restore
Color
Green
Blue when activated
Amber
Amber
Amber
Operator Panel
Not available with this interface
Not available with this interface
Not available with this interface
Operation > Move Cartridge from
Drive to Home Slot
Not available with this interface
Not available with this interface
Not available with this interface
Not available with this interface
Not available with this interface
Descriptions
Steady when power is on, flashing with tape Ready
drive or library robotic activity.
The unit identification (UID) LEDs are controlled by
the user through the Maintenance > UID LED
Control screen. The UIDs on the Operator Panel and
base module back panel are activated and
deactivated together. In addition, UIDs on drives and
expansion module back panels can be activated
separately. The UIDs are helpful for locating
components of the library in a data center.
On, when a tape drive-cleaning operation is
recommended.
Flashing if the library detected a condition for which
user attention is necessary, but the library can still
complete most operations.
On, if an unrecoverable tape drive or library error
occurs. A corresponding error message is displayed
on the LCD screen. User intervention is required as
the library is not capable of completing some
operations.
Menu Navigation
Management GUI
Settings > Library > Advanced
Settings > Library > Auto Calibration
(service user)
Library > Logical Libraries > Actions >
Manage Logical Library (Expert Mode)
See "Methods of cleaning drives" on
page 69.
Drives > Actions > Eject Cartridge
from Drive
Cartridges > Actions > Inventory
Library
Cartridges
Cartridges > Actions > Move
Cartridges
Cartridges > Actions > Graphical View
Settings > Security > GUI
63
Managing