POWR
Checking the connecting rod small
end axial play
1. Install the bearing and connecting rod.
2. Measure the connecting rod small end
axial play. Replace the bearing and con-
necting rod if above specification.
NOTE:
To measure the axial play, set the dial gauge
at the connecting rod small end and parallel
to the crankshaft.
Connecting rod small end
axial play limit:
2.0 mm (0.08 in)
Disassembling the upper bearing
1. Remove the O-ring and oil seal.
5-29
Power unit
68850460
69R50340
Assembling the upper bearing
1. Apply grease to the new oil seal 1, new
O-ring 2, and then install them onto the
upper bearing.
2
Bearing inner race attachment 3:
90890-06640
3
1
68850580
6885J11