Installing The Shift Rod; Installing The Drive Shaft - Yamaha 55DEHD Service Manual

3. Install the shim(s) and new taper roller
bearing outer race.
6
cC
Do not reuse the bearing, always replace it
with a new one.
NOTE:
9 Be sure to select the forward gear shim(s) if
the lower case or taper roller bearing is
replaced.
9 To select the shim(s), refer to page 6-25.
9 Apply gear oil to the inside and outside of
the taper roller bearing outer race before
installation.
Bearing outer race attachment 6:
90890-06621
Driver rod LL 7: 90890-06605
6885J11
7
68860300
Drive shaft and lower case

Installing the shift rod

1. Install the shift cam 1, shift rod 2 and
plate 3, then tighten the bolts 4.
4
3
2
NOTE:
Install the shift cam 1 with the "UP" mark a
facing up.

Installing the drive shaft

1. Install the forward gear 1, pinion 2,
drive shaft 3 and pinion nut 4.
NOTE:
Install the drive shaft 3 lifting it up slightly,
and then align its splines with the pinion 2.
1
a
2
1
3
68860320
4
5
6
3
7
8
2
4
1
9
68860310
6-18