Status Check Method
There are the following three methods to check Discproducer status.
❏ Checking the STF file
•
See the STF file using the cooperative application.
•
This file contains status information on the job and Discproducer, and error code issued by the
cooperative application. We recommend that you use this file for error handling.
❏ Checking the JDF file extension
•
See the JDF file extension using the cooperative application.
•
The status of each job can be checked easily.
•
The extension of the JDF file changes according to the operation status. Only by checking the
extension, you can know the status.
❏ Checking the EPSON Total Disc Monitor screen on the computer
•
Activate EPSON Total Disc Monitor on a computer connected to Discproducer to check the status.
This cannot be automated by the cooperative application.
•
EPSON Total Disc Monitor allows you to check status of jobs performed directly by EPSON Total
Disc Maker in addition to jobs using the cooperative application.
•
You cannot see the status information over a network.
10
Your Cooperative Application
In the same computer
Checks
INP
STF
JDF file
extension
Updated every
5 seconds
TD Bridge
Total Disc Maker
Discproducer
Monitoring Folder
Checks
STF file
Check
on the screen
Total Disc Monitor