Epson PP-100II Technical Reference Manual page 32

Setting Item
Drive Drive to Use
Settings
Number of write retries
Printer Show error mark on
Settings discs that experience
error
PP-100AP
EPSON Total Disc Setup Properties window is displayed. In the window, the following settings can be made.
Setting Item
Name
Stacker Publish Mode
Settings
Stacker 3
32
Select the drive to be used for writing data to the blank discs. Select one
from the following three options; "Use Both", "Use Drive 1 Only", and "Use
Drive 2 Only".
Specify the number of retries in the case of writing errors. The number can
be entered in the range of 0 to 9.
Tick the checkbox when you want to print an error mark on published
discs that may have been improperly burnt (an error occurs during
writing). This helps you to separate the failed discs from the normal ones.
You can change the name of PP-100AP. The name is used to be specified
in the JDF file using Publisher key.
Up to 64 characters can be used for the name.
You cannot register multiple PP-100AP with the same name.
Select the publishing mode from the following three options; "Standard
Mode", "External Output Mode", and "Batch Mode". See the PP-100AP
User's Guide for more information on the publishing mode.
When "Standard Mode" is selected:
"Use" or "Do not use"
When "External Output Mode" is selected:
"Output Stacker" or "Do not use" can be selected:
When "Batch Mode" is selected:
"Output Stacker"
Explanation
Explanation