Epson PP-100II Technical Reference Manual page 79

Section name Key name
PUBLISHER[N] PRINTABLE_COPIES
MAINTENANCE_BOX_
FREE_SPACE
DRIVE1_STATUS
DRIVE1_PLUG_IN
DRIVE1_LIFE
DRIVE2_STATUS
DRIVE2_PLUG_IN
DRIVE2_LIFE
MODE
SERIAL_NUMBER
Chapter 4 Development Guide for a Cooperative Application
Explanation
The minimum number that the device
can print is output.
The free space of the maintenance box of
the device is output.
An ID indicating the status of drive 1 of
the device is output.
The plug-in name when drive 1 of the
6
device is in use. *
(Jobs with the error rate measurement
setting only are not written.)
The life (%) of drive 1 of the device is
output.
An ID indicating the status of drive 2 of
the device is output.
The plug-in name when drive 2 of the
6
device is in use. *
The life (%) of drive 2 of the device is
output.
An ID indicating the mode of the device is
output.
The serial number of the device is output.
Output values that indicate
status
When the number of printable pages is
1000 or more, "1000" is output.
When the number of printable pages is 0,
"0" is output.
When the number of printable pages is
unknown, "-1" is output.
If no jobs that include printing have been
published since the device was started, "-
1" is output.
"0" to "100" is output.
If unknown, "-1" is output.
Standby: "1"
Writing: "2"
Verifying write: "3"
Unused: "4"
Error: "5"
Transferring: "6"
Stopping: "7"
Processing Plug-in: "8"
Unknown: "-1"
Plug-in name
"0" to "100" is output.
If unknown, "-1" is output.
If you are using the PP-100N and the
server system software is Ver 1.01 or
earlier, "-1" is output.
Standby: "1"
Writing: "2"
Verifying write: "3"
Unused: "4"
Error: "5"
Transferring: "6"
Stopping: "7"
Processing Plug-in: "8"
Unknown: "-1"
Plug-in name
"0" to "100" is output.
If unknown, "-1" is output.
If you are using the PP-100N and the
server system software is Ver 1.01 or
earlier, "-1" is output.
Standard Mode: "1"
External Output mode: "2"
Batch mode: "3"
Error Rate Measurement Mode: "4"
Read back mode: "5"
Unknown: "-1"
Serial number
Change
timing
When ink is con-
sumed
When the remain-
ing space of the
maintenance box is
changed
When the drive 1
status is changed
When using Plug-In
at drive 1
When the drive 1
life is changed
When the drive 2
status is changed
4
When using Plug-In
at drive 2
When the drive 2
life is changed
When the mode of
the device is
changed
Always appears as
long as registered
machine exists
79