Epson PP-100II Technical Reference Manual page 8

Canceling the job
The following diagram shows the operation sequence when the JCF file is moved to the monitoring folder and then canceled
by the cooperative application.
Your Cooperative Application
In the same computer
Monitoring Folder
DON
DON — INP
Discproducer
Pausing the job
The following diagram shows the operation sequence when an event that causes a job to pause occurs, such as cover open
on Discproducer and pause processing by EPSON Total Disc Monitor.
Your Cooperative Application
In the same computer
Monitoring Folder
INP
Pausing
INP — STP
Total Disc Maker
Discproducer
8
Specifies Job ID to be
created when cancelled
JCF
Moved into
monitoring folder
INP STF JCF
Cancel
<
TD Bridge recognizes
TD Bridge
Sends cancel command to
Total Disc Maker
Total Disc Maker
Check
as necessary
STP STF
>
TD Bridge
Total Disc Monitor
Cover
Open
(1) The cooperative application creates a JCF file and
moves it to the monitoring folder.
(2) When a JDF file is found in the folder, cancel
processing is started.
(3) A cancel command is sent to EPSON Total Disc
Maker.
The INP file in the monitoring folder is changed to
DON file.
JCF file
(1) Occurrence of an event that causes a job to pause.
(2) The INP file in the monitoring folder is changed to
STP file.
(3) The cooperative application confirms the pause
status.
(4) When the cause of the pause is removed, such as
Discproducer cover is closed, or the job is restarted
by EPSON Total Disc Monitor, the disc publishing
operation is resumed.
Stop