❏ Model-specific Settings (General)
Setting Item
Print Setting
Print Mode Setting
❏ Model-specific Settings (PP-100AP)
Setting Item
Print Setting
Print Mode Setting
Default input stacker to use in External
Output Mode
Select the print quality from the following two options; "Quality" (for the best
print quality) and "Speed" (for the highest print speed).
If specified in both job description files and the environment settings screen, the
setting of job description files is prioritized.
This sets the print quality. To give priority to print quality, specify "1". To give
priority to printing speed, specify "2" or "3" (specify "3" for the fastest printing
speed).
If specified in both job description files and the environment settings screen, the
setting of job description files is prioritized.
This sets the input stacker that is normally used in External Output Mode. Specify
"Stacker 1" for Stacker 1, "Stacker 2" for Stacker 2, or "Auto" for both stackers.
Chapter 3 Setting
Explanation
Explanation
3
27