Error Handling - Epson PP-100II Technical Reference Manual

Error handling

When an error occurs while checking the RJD file or writing data to a disc, the RJD file or INP file is changed to ERR (ERRor) file.
The error code is written to the STF file.
When an error occurs while checking the RJD file or writing/printing data to a disc, the RJD file or INP file is changed to ERR
(ERRor) file. The error code is written to the STF file.
In the case of errors during operation, job error information moves to the log folder after one or two hours, and device error
information remains in the STF file unless the reason for the error is removed. (For more details on STF file, see
page 4-72.)
In the same computer
Registering another job during operation
You can register another job during operation. When a JDF file is created and moved to the monitoring folder using the
cooperative application, preprocessing is performed and the JDF file is changed to RJD file. Then when the preprocessing is
completed, the RJD file is changed to INP file and holds the status until the ongoing job is finished.
Upon completion of the ongoing job, the registered job is automatically started.
The discs are published in the order of registration. Setting the job priority enables jobs registered later to be started earlier.
Your Cooperative Application
Monitoring Folder
Error during
preprocessing
RJD ERR
Log folder
TD Bridge
Disc
image data
Error during
EPSON Total Disc Maker
preprocessing
PRN
Discproducer
Write
data 2 Your Cooperative Application
JDF2
Print
data 2
In the same computer
Next job becomes INP file
and waits until the
ongoing job is finished
JDF2 RJD2
Disc
image data 2
PRN 2
Disc
image data
Total Disc Maker
PRN
Discproducer
Chapter 1 TD Bridge Overview
Check
as necessary
Error during
operation
INP STF
Error code
is written
Error during
operation
Monitoring Folder
INP2 INP1 STF
Error code
is written
TD Bridge
"STF File" on
1
9