Suzuki SX4 2016 Owner's Manual page 182

Automatic transaxle or TCSS models
1) With the gearshift lever in "D" or "N",
depress brake pedal and stop the vehi-
cle.
EXAMPLE
61MM453
(1)
2) The "ENG A-STOP" indicator light
(green) (1) in the instrument cluster will
illuminate and the engine will stop auto-
matically.
NOTICE
The brake booster becomes inoperative
and the pedal effort will increase when
the engine is stopped automatically.
If the vehicle is moving, press down
the brake pedal harder than usual.
NOTE:
The ENG A-STOP system will not operate
and engine does not stop automatically
under the following conditions:
• The "ENG A-STOP OFF" switch is
pressed to deactivate the ENG A-STOP
system.
• The "ENG A-STOP OFF" light blinks.
• Engine coolant temperature is either low
or high.
• Vehicle battery performance is low.
• The temperature of the vehicle battery is
either low or high.
• Brake booster vacuum pressure is low.
• Depressing the accelerator pedal.
• Blower speed selector is set to the "ON"
83RM076
mode and the inside of the vehicle has
not sufficiently cooled and warmed.
• The defrost switch is set to the "ON"
mode.
• During or after the ABS or ESP
is activated, and the vehicle is stopped.
• During the first period use, to initialize
the system.
• After the engine restarted automatically,
and the vehicle speed had not exceeded
approximately 5 km/h.
OPERATING YOUR VEHICLE
• When the engine is started with the hood
open.
• The vehicle has stopped on a steep hill.
• The gearshift lever is in a position other
than "D" or "N".
• The vehicle is driven in the manual
mode.
• When the vehicle has stopped without
depressing the brake pedal.
• The signal to prevent stopping the
engine is received from any electronic
control systems other than the ENG A-
STOP system.
®
system
3-44
83RM0-01E