Suzuki SX4 2016 Owner's Manual page 207

OPERATING YOUR VEHICLE
NOTICE
If water enters the rearview camera, it
may cause a malfunction or catching
fire.
Do not use high pressure water
around the camera.
NOTICE
This lens is hard coated to prevent
damage or discoloration. Damage or
discoloration of lens may obscure
the image.
• Do not use a brush to clean lens.
• Do not use alcohol, benzene or
thinner to clean the lens.
• Do not use wax on the camera lens.
NOTE:
If body wax does get on the camera lens,
wipe off the wax with a clean cloth damp-
ened with mild detergent diluted with
water, then wipe with a dry cloth.
3-69
How to Use Rearview Camera
1) Turn the ignition switch to the "ON"
position or press the engine switch to
change the ignition mode to "ON".
2) Shift the gearshift lever in the "R" posi-
tion.
• The display automatically shows the
view behind the vehicle.
• When the gearshift lever is shifted
from "R" to another gearshift lever
position, the display returns to the
previous display.
NOTE:
The rearview camera display has first pri-
ority in any display mode. However, the
rearview camera display does not show
the rear view while the system is initializ-
ing.
Display Range of Rearview Camera
The rearview camera display shows the
area behind the rear end of the tailgate.
The display cannot show objects which are
close to the bumper or under the bumper.
The rearview camera display cannot show
obstacles which are higher than the cam-
era. Upper parts of tall objects such as
road signs cannot be viewed on the dis-
play.
Example of display range of rearview
camera
EXAMPLE
(1)
61MM0A015
EXAMPLE
(1)
61MM0B012
(1) Display range
83RM0-01E