Suzuki SX4 2016 Owner's Manual page 95

Table of Contents

Advertisement

BEFORE DRIVING
Selector Position / Gear Position /
Gearshift Indicator
The display (E) shows some of the follow-
ing indications.
EXAMPLE
(4)
(6)
(7)
54P020201
(4) Selector position
(5) Gear position
(6) Manual mode indicator
(7) Drive mode indicator
Selector position (for automatic tran-
saxle or TCSS models) /
Gear position (for automatic transaxle
or TCSS models)
The display shows the transaxle selector
position (4) or the gear position (5).
• For automatic transaxle models;
– When the manual mode is not in use,
the display shows the selector posi-
tion.
– When using the manual mode, the dis-
play shows the current gear position.
• For TCSS models;
– When the gearshift lever is in "P", "R"
or "N", the display shows the selector
position.
2-71
– When the gearshift lever is in "D" or
"M", the display shows the current
gear position.
NOTE:
For TCSS models, when the gearshift
lever position and the selector / gear posi-
tion indication in the information display
(5)
are unmatched, the indication will blink and
the interior buzzer will sound. Refer to
"Twin Clutch System by Suzuki (TCSS)" in
the "OPERATING YOUR VEHICLE" sec-
tion for details.
Manual mode indicator (for automatic
transaxle or TCSS models)
When you are using the manual mode, the
display shows the manual mode indicator
(6).
NOTE:
For TCSS models, the manual mode indi-
cator will only appear when the gearshift
lever is in "M".
Drive mode indicator (for TCSS models)
When the gearshift lever is in "D", the dis-
play shows the drive mode indicator (7).
For details on how to use the transaxle,
refer to "Using the Transaxle" in the
"OPERATING YOUR VEHICLE" section.
Gearshift indicator
Refer to "Gearshift Indicator" in the
"OPERATING YOUR VEHICLE" section.
Trip Meter
The display (F) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use the trip meter A or trip meter B
independently.
To reset the trip meter to zero, push and
hold the trip meter selector knob (3) for
about 2 seconds when the display shows
the trip meter.
Odometer
The display (G) shows the odometer.
The odometer records the total distance
the vehicle has been driven.
NOTICE
Keep track of your odometer reading
and check the maintenance sched-
ule regularly for required services.
Increased wear or damage to certain
parts can result from failure to per-
form required services at the proper
mileage intervals.
83RM0-01E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx4 s-cross 2016

Table of Contents