Bulb Replacement - Suzuki SX4 2016 Owner's Manual

INSPECTION AND MAINTENANCE

Bulb Replacement

CAUTION
• Light bulbs can be hot enough to
burn your finger right after being
turned off. This is true especially
for halogen headlight bulbs.
Replace the bulbs after
become cool enough.
• The headlight bulbs are filled with
pressurized halogen gas. They can
burst and injure you if they are hit
or dropped. Handle them carefully.
• To avoid injury by sharp-edged
parts of the body, wear gloves and
a long-sleeved shirt when replacing
light bulbs.
NOTICE
The oils from your skin may cause a
halogen bulb to overheat and burst
when the lights are on. Grasp a new
bulb with a clean cloth.
NOTICE
Frequent replacement of a bulb indi-
cates the need for an inspection of
the electrical system. This should be
carried out by your SUZUKI dealer.
7-53
Headlights
LED headlights
Since special procedures are required, we
recommend you take your vehicle to your
SUZUKI dealer for bulb replacement.
Halogen headlights
they
(2)
(1)
(1) Low beam
(2) High beam
1) Open the engine hood.
Low beam
For the low beam;
2) Disconnect the coupler by pushing the
lock release. Turn the bulb holder coun-
terclockwise and remove it.
83RM065
EXAMPLE
80JM071
83RM0-01E