Removal And Installation Of Operator Cab Assembly - Komatsu Galeo PC138US-8 Shop Manual

SEN02715-00
Removal and installation of
operator cab assembly
Removal
k
Park the machine on a level place and lower
the work equipment stably to the ground.
Stop the engine and set the lock lever to
locked position.
k
Disconnect the negative (–) terminal of the
batterybeforehand.
1. Remove floor mat (1).
2. Remove machine monitor (2), referring to
"Removal and installation of machine monitor
assembly."
3. Remove covers (3) to (6).
a When removing cover (5), simultaneously
remove cigar lighter wiring connector that
attached to the back of the cover.
4. Remove ducts (7) and (8).
5. Loosen R.H. console (9) and shift toward the
inside.
6. Disconnect window washer hose (10).
2
7. Remove cover (11).
1
8. Remove cover (12) and duct (13).
9. Disconnect cover (14).
10. Remove cover (15).
11. Disconnect KOMTRAX antenna cable (16).
12. Disconnect wiring connectors (17) to (21).
50 Disassembly and assembly
PC138US, USLC-8