If You Replace The Recording Paper Feeding Related Parts Or Maintenance Unit; Check Head Nozzles (Maintenance Mode 09); Adjustment Of Software Correction For Inclination/Corrugation/Ruled Lines; (Maintenance Mode 65) - Brother MFC Series Service Manual

6 IF YOU REPLACE THE RECORDING PAPER FEEDING RELATED
PARTS OR MAINTENANCE UNIT
The paper feeding related parts to be adjusted after replacement are listed below.
Paper feed roller
•
Paper ejection roller
•
Carriage PCB ASSY
•
Flushing box
•
Platen ASSY
•
CR encoder strip
•
PF encoder disk
•
PF encoder sensor PCB ASSY
•
<Operations>

6.1 Check Head Nozzles (Maintenance mode 09)

6.2 Adjustment of Software Correction for Inclination/Corrugation/Ruled Lines

(Maintenance mode 65)

6.3 Update the Paper Feeding Correction Values (Maintenance mode 58)
6.4 Margin Adjustment in Borderless Printing (Maintenance mode 66)
6.5 Check Printing
<Requirements>
(1) USB cable: 1 piece
(2) Create a temporary folder in the PC's C drive (Windows XP or later).
(3) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(4) Maintenance driver (MaintenanceDriver.zip)
Make a copy of the maintenance driver in the temporary folder in the C drive. Extract
the copied file and install it. Refer to
MAINTENANCE DRIVER"
(5) Data files of print patterns
Inner chute ASSY
•
Registration sensor PCB ASSY
•
Carriage motor ASSY
•
Paper feed motor
•
Flushing base
•
Maintenance unit
•
CR timing belt
•
"APPENDIX 3. INSTALLING THE
for details on the installation.
4-20
Confidential