Table of Contents
Advertisement
6.1
Check Head Nozzles (Maintenance mode 09)
Refer to
Chapter 5 "1.4.5 Printout of Test Pattern (Maintenance mode 09)"
the execution.
6.2
Adjustment of Software Correction for Inclination/Corrugation/Ruled
Lines (Maintenance mode 65)
Refer to
Chapter 5 "1.4.20 Adjustment of Vertical Print Lines/Software Correction for
Inclination/Corrugation/Ruled Lines (Maintenance mode 65)"
software correction for inclination/corrugation/ruled lines.
6.3
Update the Paper Feeding Correction Values (Maintenance mode 58)
Refer to
Chapter 5 "1.4.17 Updating of Paper Feeding Correction Value (Maintenance
mode 58)"
for details on the execution.
6.4
Margin Adjustment in Borderless Printing (Maintenance mode 66)
Refer to
Chapter 5 "1.4.21 Margin Adjustment in Borderless Printing (Maintenance mode
66)"
for details on the execution.
6.5
Check Printing
In
"1.14 Check Scanning and Printing"
Correction Values", "Adjustment of Vertical Print Lines/Software Correction for Inclination/
Corrugation/Ruled Lines", and "Margin Adjustment in Borderless Printing" for details on the
execution.
of this chapter refer to "Update the Paper Feeding
4-21
for details on
for details on how to adjust
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
