Brother MFC Series Service Manual page 48

Code 1 Code 2
The remote terminal is not equipped with a confidential
32 11
mailbox function, or is not ready for receiving.
The remote terminal is not equipped with a relay function
32 12
or is not yet finished preparing it.
32 13 There are no confidential mails in the remote terminal.
The available memory space of the remote terminal is
32 14 less than the requirement for reception of the confidential
or relay broad-casting instruction.
The remote terminal is not equipped with cipher receiving
32 15
function.
32 16 The remote terminal is not equipped with SEP function.
32 17 The remote terminal is not equipped with SUB function.
32 18 The remote terminal is not equipped with color function.
40 02 An illegal coding system was requested.
40 03 An illegal recording width was requested.
40 05 There was an unauthorized ECM request.
Polling was received while preparations has not been
40 06
completed.
There was no document to send when polling was
40 07
received.
There is no data in the box number specified by F Code
40 08
communications.
40 10 The country code or manufacturer code does not match.
A group number not registered in the relay broadcast was
prompted, or the broadcast receiver's total was prompted
40 11
while exceeding the maximum number of possible
broadcasts.
Retrieval was performed even though the machine is not
40 12
on retrieval standby.
Polling was received from other manufacturer's products
40 13
during confidential polling stand-by.
There is no common key registration when the common
40 14
key was used.
Red-black receiving was prompted while red-black
40 15
receiving is disabled.
Cipher communication was requested while cipher
40 16
receiving is disabled.
40 17 An invalid resolution was selected.
Remote retrieval was prompted even though F Code
40 18
remote retrieval is disabled.
Remote registration was prompted even though F Code
40 19
remote registration is disabled.
40 20 An invalid full-color mode was requested.
The vertical resolution capability was changed after
50 01
compensating for the background color.
The password including the last four digits of the
63 01
telephone number does not match.
63 02 The password does not match.
Cause
2-16
Reference
Section
4.9.3
Confidential