Additional Information - ABB RMC-100 Startup Manual

Read and consider the contents of this startup guide prior to beginning installation of
the equipment. For any questions that are not answered in this guide or in the
documentation listed in the Additional information section, call the ABB main office
number listed on the back page of this guide.
Cyber security
This product is designed to be connected, and communicate information and data,
via a network interface, which should be connected to a secure network. It is the
customer's sole responsibility to provide and continuously ensure a secure
connection between the product and the customer network or any other network (as
the case may be). The customer shall establish and maintain appropriate measures
(such as, but not limited to, the installation of firewalls, application of authentication
measures, encryption of data, installation of antivirus programs, etc.) to protect this
product, the network, its system and interfaces against any kind of security
breaches, unauthorized access, interference, intrusion, leakage and/or theft of data
or information. ABB Inc. and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference, intrusion,
leakage and/or theft of data or information.
Although ABB provides functionality testing on the products and updates that it
releases, the customer should institute its own testing program for any product
updates or other major system updates (to include, but not limited to, code changes,
configuration file changes, third party software updates or patches, hardware change
out, etc.) to ensure that the security measures that the customer has implemented
have not been compromised and that system functionality in the customer's
environment is as expected

Additional information

Additional free publications, user drawings, and software for the Remote Modular
Controller 100 are available for download at www.abb.com/totalflow. The following is
a short list of related documents and drawings for quick reference.
Document name
RMC-100 user manual
RMC -100 data sheet
TFIO module user manual
RMC-100 AI to ABB 2600 T pressure transmitter
RMC-100 COMM (RS485) to ABB XMV(267/269CS/266J) W/RTD
RMC-100 to ABB FCB Coriolis meter
Assumptions
— The software PCCU32 version 7.55 or newer is installed and operational on the
PC used to communicate with the RMC equipment for configurations. Previous
versions of PCCU32 are not compatible.
— Installation and maintenance will only be conducted by personnel authorized to
work on electrical installations.
— Installation and maintenance will be conducted in accordance with relevant
national and local codes.
2 | 2105551-001 rev. AC
Number
2105552
2101126
2101226
2105593
2105579
2105592