ABB Endura AZ40 Manual page 11

Standard temperature probe – all other flange versions
IMPORTANT (NOTE)
Before installing the probe / sensor assembly into the
process, complete transmitter installation as detailed on
page 12. The sensor assembly must have all services
connected with the transmitter ready for power up.
Referring to Fig. 12:
1. Remove 4 nuts and washers
B
threads .
C
2. Secure flange to sensor assembly threads
4 nuts and washers (removed at step 1).
3. Feed flanged probe / filter / sensor assembly
E
flange and secure flange
F
and washers (not supplied).
Fig. 12 Standard temperature probe – all other flange versions
CI/AZ40-EN Rev. A
A
from sensor assembly
B
using
D
through
C E
to flange using 4 nuts
High-temperature probe
IMPORTANT (NOTE)
Before installing the probe / sensor assembly into the
process, complete transmitter installation as detailed on
page 12. The sensor assembly must have all services
connected with the transmitter ready for power up.
Referring to Fig. 13.
1. Feed flanged probe / filter / sensor assembly
B
flange .
B
2. Secure flange to flange
(not supplied).
Fig. 13 High temperature probe
Mounting the transmitter
Referring to Fig. 14.
A
1. Fix the transmitter to a solid wall using 4 x fixings (not
B
supplied) at location
supporting a minimum weight of 7.6 kg (16.65 lb.).
Fig. 14 Mounting the transmitter
A
through
C
using 4 nuts and washers
. Fixings must be capable of
D
11