Operation - ABB Endura AZ40 Manual

8

Operation

Front panel keys
The transmitter is operated using the keys on the front panel.
Prompts associated with active keys are displayed on each
screen. Display icon descriptions are detailed in Operating
instruction OI/AZ40-EN.
Key Function
Navigation key – left /
A
Operator menu access key
B
View key
C
Up key
D
Down key
E
Group key
Navigation key – right /
F
Cal shortcut key
Table 5 Key functions
Operator Page 1
Oxygen / Combustibles
Outlet Temp. / Efficiency
Diagnostics View
Calibration Log
Fig. 24 Menu navigation overview
30
Description
When any Operating, View or Log page is displayed, opens or closes the Operator menu and returns
to the previous menu level.
Toggles the view between Operator pages, Diagnostic View and Calibration Log screens.
Note. Disabled in Configuration mode.
Used to navigate up menu lists, highlight menu items and increase displayed values.
Used to navigate down menu lists, highlight menu items and decrease displayed values.
Toggles between:
— Operator pages (1 to 5) when an Operator page is selected with the View key.
— View screens (Diagnostics, Signals, Chart, Alarms, and Outputs) when the Diagnostic View
screen is selected with the View key.
— Log screens (Calibration, Alarm, Audit and Diagnostic) when the Calibration Log screen is
selected with the View key.
Note. Disabled in Configuration mode.
At menu level, selects the highlighted menu item, operation button or edits a selection.
When any Operating, View or Log page is displayed, used as a shortcut key to access the Calibrate
level.
Operator Page 3:
Operator Page 2:
Combustibles
Oxygen
Signals View
Alarm Log
Fig. 23 Front panel keys
Operator Page 4:
Inlet Temp.
Outlet Temp.
Outlet – Inlet
Alarms View
Chart View
Audit Log Diagnostic Log
Operator Page 5:
Efficiency
Outputs View
CI/AZ40-EN Rev. A