Signal cable connections
Referring to Fig. 18:
1. Fit a suitable cable gland / conduit fitting at entry
B
2. Feed transmitter end
and connect to transmitter terminal block
cable gland / conduit fitting.
3. Close and lock transmitter door
4. Fit a suitable cable gland / conduit fitting at entry
G
5. Feed sensor end
of signal cable
connect to sensor terminal block
gland / conduit fitting.
I
6. Refit sensor cover
using 4 x sensor cover screws
7. Proceed to page 16 for customer-made input / output
connections.
Fig. 18 Signal cable connections
CI/AZ40-EN Rev. A
A
C
of signal cable
through entry
D
. Secure with
E
using the supplied key.
F
C
through entry
H
. Secure with cable
.
A
.
F
and
J
.
15