Siemens 3TK2810-1 System Manual page 44

Operation
6.2 Parameterizing/configuring
If this setting is changed, points 1.4, 1.5 and 1.7 are reset to the default values.
1)
44
Parameterization
1.6 Initiator settings
Initiator type
pnp
npn
Resolution E1
xxxxx [pulses/rev. or mm]
Resolution E2
xxxxx [pulses/rev. or mm]
ESC
1.7 Speed limits
Automatic max.
xxxxx [rpm or m/min]
Automatic min.
xxxxx [rpm or m/min]
Setting max.
xxxxx [rpm or m/min]
Setting min.
xxxxx [rpm or m/min]
Standstill
xxxxx [rpm or m/min]
ESC
1.8 Times
Start override
xx.x [s]
Release delay
xxx.x [s]
Switch-off monitoring
xxx.x [s]
ESC
1.9 Start type
Manual start
Automatic start
ESC
1.10 Protective door monitoring
Simultaneity on
Simultaneity off
ESC
3TK2810-1 safety-related speed monitor
System Manual, 01/2011, 926246402000 DS 02
OK
OK
OK
OK
OK