Diagnostics/Troubleshooting; Reading The Setting Values During Operation; Troubleshooting - Siemens 3TK2810-1 System Manual

Safety relays, safety-related speed monitor, industrial controls

Hide thumbs Also See for 3TK2810-1:

Table of Contents

Diagnostics/troubleshooting

7.1

The parameters set on the device during normal operation can be read using the "up/down"

arrow keys.

7.2

If faults are detected on or in the device, these are indicated by the LEDs and on the display

with the appropriate message. If the fault necessitates a reset of the device, the pending

fault must first be corrected and the error/diagnostics message on the device must be

acknowledged. The left button must then be pressed for approximately 3 seconds to trigger a

reset of the device.

In the case of system faults, the device must be briefly switched off. If a system fault is

detected again on switching on, the device must be returned to the manufacturer.

3TK2810-1 safety-related speed monitor

System Manual, 01/2011, 926246402000 DS 02

▲

Table of Contents