Operation
6.2 Parameterizing/configuring
6.2.2
Parameterization using the display
To enter the parameterization mode of the device, press the following button combinations:
● Press the right button and keep it pressed.
● Also press the left button (see below).
A display test follows
● After correct execution of the display test, confirm with the OK button (right button)
● The parameterization can then be modified.
● Before the device accepts the modified parameters, you must confirm the parameters
again for security.
Hazardous Voltage.
Can Cause Death, Serious Injury, or Property Damage.
Carry out functional test of the system
To guarantee the safety of the system, a full functional test must be carried out and
successfully concluded following parameterization.
Note
You must document the set parameters with the printed form (see Chapter "Appendix
(Page 75)").
42
▲
▲
WARNING
3TK2810-1 safety-related speed monitor
System Manual, 01/2011, 926246402000 DS 02