6.3.2
Configuration examples
6.3.2.1
Rotational motion, rotary encoder
Settings on the display using the example above:
Scenario A:
1. Parameterization:
1.1 Monitored motion:
1.2 Encoder type:
1.3 Encoder selection:
1.6 Initiator settings:
1.4 Increase/transmit:
The speed limits (rpm) to be set refer to the speed at initiator E1.
Scenario B:
1. Parameterization:
1.1 Monitored motion:
1.2 Encoder type:
1.3 Encoder selection:
1.6 Initiator settings:
1.4 Increase/transmit:
The speed limits (rpm) to be set refer to the speed at initiator E1.
3TK2810-1 safety-related speed monitor
System Manual, 01/2011, 926246402000 DS 02
Resolution E1
Resolution E2
Transmission:
Resolution E1
Resolution E2
Transmission:
Rotational
Rot. encoder
E1+E2
16 pulses/rev.
4 pulses/rev.
50:1
Rotational
Rot. encoder
E1+E2
4 pulses/rev.
4 pulses/rev.
1:1 (since the measurement is made at the
same point)
Operation
6.3 Configuring
49