4.3
Disassembling the device
Hazardous Voltage.
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Requirements
● All system interface connections are terminated.
● The terminal blocks have been removed or disconnected.
Disassembling the device from a DIN rail
Step
3TK2810-1 safety-related speed monitor
System Manual, 01/2011, 926246402000 DS 02
WARNING
Operating instruction
1
Pull the device down until the lower half
can be pulled away from the DIN rail.
2
Pull the lower half of the device away
from the DIN rail.
3
Lift the device from the upper edge of
the DIN rail.
Assembling
4.3 Disassembling the device
Figure
31