Overviews; Overview Of The Hydraulic Module - Siemens SINAMICS S120 System Manual

4.15

Overviews

4.15.1

Overview of the hydraulic module

In the overview of the drive object Hydraulic Drive (HLA), all the data is displayed, which was
capable of being determined with the automatic device configuration.
Figure 4-15
Further actions:
● You can scroll between all of the drive objects using the "Drive +" and "Drive -" softkeys.
If the actual drive object is a Hydraulic Drive, the overview page of the HLA
commissioning wizard is displayed. These softkeys are only active if there are several
drives.
● You open the direct selection dialog using the "Select drive" softkey. This dialog displays
all servo and HLA drive objects. This softkey is only active if there are several drives.
● Click on the "Change" softkey to make changes and other settings on the displayed drive
object, e.g. assign the encoders.
● The "Encoder data" softkey opens a window for subsequently configuring the assigned
encoders.
Hydraulic Drive
System Manual, 04/2015, 6SL3097-4BA00-0BP1
Overview of the hydraulic module
Commissioning
4.15 Overviews
71