Siemens Sinumerik 802D sl Programming Manual page 37

04.07
Example of programming
Example of programming
G291 ;
G94 ;
T0101 ;
G00 X120.0 C0 ;
G12.1 ;
G01 G42 X40.0 F100.0 ;
G03 X0 C40.0 I--20.0 ;
G01 X--25.0 ;
G03 X--40.0 C25.0 K--15.0 ;
G01 C0 ;
G03 X20.0 I20.0 ;
G01 G40 X120.0 ;
G13.1 ;
M30 ;
Fig. 2-13
Notice
Cylindrical interpolation mode must be deselected before the tool radius com-
S
pensation and length compensation are deselected.
© SIEMENS AG 2007 All rights reserved
SINUMERIK 802D sl/840D sl840D/840Di sl/840Di/810D ISO Turning -- 04.07 Edition
Virtual C-axis
Coordinate system for polar coordinate interpolation
Commands Calling Axis Movements
2.1 Interpolation commands
C-axis
X-axis
Cutting tool
Positioning at the cutting start point
Polar coordinate interpolation mode ON
Machining program using the polar coordi-
nate interpolation function
Polar coordinate interpolation mode OFF
2-37