Table of Contents
Advertisement
Table 2 Control Panel Limitation
Item
General fire alarm via programmable input
External fault via programmable input
Programmable inputs
Programmable outputs (= control expressions)
Technical warnings
Addressable 2 voltage outputs unit 3364
External display units
Interlocking Combinations
Presentation numbers / alarm points
in the display(s) in case of fire alarm
Presentation numbers
Zones that can be programmed
Faults
Disabled zones
Disabled alarm points (zone/address) + Disabled COM loops
Disabled outputs
Disabled interlocking outputs
Sensors activating SERVICE signal
AAF zones (Max. 5 detectors per AAF zone.)
Total number of expansion boards 4580, 4581 and
Number of I/O matrix boards 4582
Total number of 4582 for zone control and generic applications
Number of user definable text message programmed per 1728
and 1736
9
Approx. 4000 trigger conditions can be used in these control expressions, more outputs can be used without control expression
(V2.1.1 and higher).
10
Max. 100 user definable texts can be displayed "at the same time".
Presentation number is a ZONE only or ZONE – ADDRESS.
11
12
Any zone number between 001 and 999 can be used for the 512 zones.
13
Zone/address disabled via time channel not included.
14
Control outputs disabled via menu H2/B3 and Alarm devices disabled via menu H2/B4 are not included.
15
Interlocking outputs disabled via menu H2/B3 are not included.
16
Used in conjunction with the Alarm Acknowledgement Module (AAM).
17
Expansion boards 4580, 4581 and 4583 are physical connected to COM loop 0
18
Reduce no. of 4582 boards by one for every expansion board used (4580, 4581 or 4583).
9
11
that can be presented
8
that can be programmed
16
18
18
Technical/Programming Manual
C.I.E.
100
50
512
512
100
40
16
400
512
512
12
512
100
17
4583
6
24
6
617
FT1020G3 Rev 2.2.1
Network System
30 x 50
30 x 100
30 x 16
10
4000
512
30 x 512 = 15 360
999
300
512
13
200
14
200
15
200
200
30 x 100
30 x 6
30 x 24
30 x 6
Advertisement
Table of Contents
