Table of Contents
Advertisement
No.
Switch name
<1>
<2>
<3>
<4>
<5>
<6>
Touch panel
<7>
<8>
<9>
<10>
<11>
<12>
<13>
<14>
<15>
Turns the power ON/OFF.
Lights when the main power switch on the power panel is ON.
Goes out when the system is started up.
Lights again when the system is shut down.
Indicates the battery charge level.
(Lights when the main power switch on the power panel is ON.)
Lights green if the batteries are adequately charged.
Lights orange if the batteries need to be charged.
Displays the [Patient Registration] screen.
The ID and measurement data for the previous patient are
deleted and the initial conditions are restored.
Used to select the transducer.
Displays switches specific to the type of examination (switches for
image control, measurements, etc.). The desired switch can be
touched with a finger to operate it.
The functions of these knobs vary depending on the mode or
other conditions.
The functions currently assigned to the knobs are displayed on
the touch panel.
Used to specify the echo reception sensitivity for various depths
calculated from the body surface.
Used to set the acoustic power.
Returns the settings of scan range, Color ROI, and sampling gate
to their initial values.
Displays monochrome and color images simultaneously in real
time.
Starts trapezoid scanning.
Enables text annotations to be added to images.
Starts the [Worksheet] screen.
Starts the [Exam Review] screen.
No. 2B771-004EN*M
6-4
Function
Advertisement
Table of Contents
