Inserting An Ied From Template Directory - ABB RELION REX640 Engineering Manual

Section 4
Setting up a project
4.3.3
54
empty or example configuration and make the proper selection
on the next page.
5. On the Version Selection page, select the IEC 61850 version and click Next to
generate the functions.
6. The Summary page shows the summary of the IED type, IP address and the
selected composition code. Click Finish to confirm the configuration and
conduct the insertion.

Inserting an IED from template directory

IED templates can be used to replicate IEDs with the same order code in PCM600
projects. The template includes an IED application configuration, graphical display
configuration (single-line diagram), communication protocol mappings and
parameters. An IED in the plant structure can be exported as a template (.pcmt file).
The template library can be built from all the exported IED templates.
It is also possible to insert an IED from the template library to create a new IED in the
plant structure. After a template IED has been imported, IP address andCaption in
IED's Object Properties and Technical Key of the physical IED have to be changed.
1. In the Plant Structure view, select the bay, right-click, point to New and select
Create from template.
A template IED can be inserted only when the bay is selected in
the plant structure.
2. In the Create New Object from Template dialog box, select the IED under
Available Object Types.
GUID-B44A7B25-EAAB-4FC5-8D48-843D026C6827 V1 EN
Figure 30: PCM600: Selecting an IED from the template library
3. Click the icon on the rightmost column in the list of available templates.
4. In the Template Properties dialog box, verify the template information and
click Close.
1MRS759117 A
REX640
Engineering Manual