Start System - ABB IndustrialIT Compact HMI 800 Getting Started

Section 7 Administration
Figure 76. Select Type of Configuration - HMI-Server88
6. Select Stop and press Next and then Finish.
7. Wait until the system has stopped. (the dialog in step 2 shows up).

Start System

To start the system without switching off and on the power follow these steps:
1. Log in as SysAdmin.
2. Open the Configuration Wizard (START>All Programs>ABB Industrial IT
Base>System>Configuration Wizard).
3BSE040587R4401
To Stop and Start the System
125